Resin flooring contractor · Ham-sur-Sambre (Belgium) · since 2012
Industrial and decorative resin flooring tailored to your substrate.
Based in Ham-sur-Sambre in the heart of Wallonia, Résifred SRL supports you from system selection and mechanical substrate preparation through to installation and maintenance of your epoxy, polyurethane or vinyl ester resin floor.
End-to-end delivery: substrate prep, installation and maintenance
Dedicated storage warehouse in central Wallonia
Close technical partnership with Remmers
INDUSTRIAL & DECORATIVE FLOORSWallonia & Belgium
3 mm epoxy floor and topcoat in a 1,000 m² assembly hall
Antistatic epoxy application
Decorative & wet-room resin
2012Track record
4Core systems
0,1–9 mmThickness
Since 2012Field track record (SRL in 2015)
Ham-sur-SambreOffice & warehouse in Namur province
0.1 to 9 mmCoatings, self-levelling, broadcast & mortar
New & refurbishmentIndustrial, commercial & residential
Our 4 system families
A comprehensive range of resin floor solutions for every constraint
Résifred applies high-performance coatings and floor systems based on epoxy, polyurethane, water-borne and vinyl ester resins from 0.1 mm to 9 mm.
Up to 0.5 mm
Coatings & finishing sealers
Thin film-forming resin coating (up to 0.5 mm) that follows the substrate profile: dust-proof protection and resistance to mild acids at a highly competitive cost.
Self-levelling poured resin system up to 3 mm that smooths out minor substrate roughness to create a seamless, easy-to-clean surface resistant to mechanical, chemical and dynamic loads.
Base resin layer broadcast to saturation with quartz sand or hard silicon carbide (SiC) grain and sealed with a finishing coat (1.5 to 9 mm): slip-resistant, safe and built for permanent water exposure.
Resin mortar blend with coordinated aggregate grading, applied by squeegee and compacted by trowel (≥ 4 mm): extreme mechanical resistance, levelling of rough slabs and suitability for sloped floors.
From worn raw concrete to a mirror-smooth epoxy floor
Taken from the exact same vantage point inside a 1,000 m² industrial hall, these two photographs show the complete refurbishment of an industrial concrete slab by Résifred.
Before works · Raw concrete slab
Worn, porous industrial concrete slab with faded floor markings prior to mechanical preparation
After works · 3 mm epoxy & topcoat
The exact same 1,000 m² hall after mechanical preparation and installation of a 3 mm epoxy floor with finishing coat
Application areas
“Every situation has its appropriate floor system.” — Fred
Our recommendations draw on over a decade of hands-on field experience and attentive listening to your requirements, for both new slabs and refurbishments.
Industrial floors & heavy-duty environments
For production halls, paint lines, assembly workshops, warehouses and food processing plants.
High mechanical, thermal and chemical resistance plus stain protection
Dust-proof, slip-resistant, acid-resistant, anti-corrosion and antistatic (ESD) builds
Strict adherence to shutdown schedules and rigorous substrate preparation
Decorative floors, commercial spaces & private homes
For contemporary interiors, showrooms and wet rooms requiring seamless design and waterproofing.
Joint-free, impervious and easy-to-clean architectural surfaces
Floor and wall epoxy systems in walk-in showers and sanitary areas
Tailored finishes (custom RAL colours, mineral quartz textures, gloss or satin)
In the field
A closer look at our projects in Wallonia and Belgium
1,000 m² industrial halls, antistatic paint lines and seamless waterproof resin installations for private clients.
Assembly hall · 1,000 m²
Application of a 3 mm epoxy resin floor with finishing topcoat
Paint hall · 1,000 m²
3 mm antistatic epoxy flooring for a new industrial paint line
Private home · Walk-in shower
Waterproof epoxy wall and floor system in a walk-in shower
Work zone · 1,000 m²
Flatness and high-gloss finish on a refurbished industrial resin floor
Your flooring project managed from start to finish
01
Step 1 : Survey & specification
On-site inspection of your substrate (new or refurbishment) and mechanical or chemical constraints.
02
Step 2 : Substrate preparation
Diamond grinding, shot-blasting, levelling and saw-cutting of anchoring grooves.
03
Step 3 : Resin installation
Precision application of your chosen system (coating, self-levelling, broadcast or mortar) with Remmers products.
04
Step 4 : Handover & maintenance
Quality inspection, aftercare guidance and ongoing maintenance support to protect your investment.
The company
Your specialist resin applicator in central Wallonia since 2012
Founded in 2012 and incorporated as an SRL in 2015, Résifred operates its own storage warehouse in Ham-sur-Sambre and works closely with technical partner Remmers to respond rapidly on site.