Epoxy · Polyurethane · Water-borne · Vinyl ester
Our solutions & application areas
Résifred installs high-performance resin floor systems ranging from 0.1 to 9 mm depending on the required chemical and mechanical resistance and surface texture. We manage your project from end to end: from substrate preparation to resin installation and long-term maintenance.
- Explore: Resin floor coatings & sealers
Up to 0.5 mm
Resin floor coatings & sealers
Finishing coatings provide reliable, cost-effective protection for concrete floors exposed to light to medium loads, with a film-forming thickness of up to 0.5 mm.
- Explore: Self-levelling liquid resin floors
Up to 3 mm
Self-levelling liquid resin floors
Spread evenly up to 3 mm thick, self-levelling liquid resin floors smooth out minor irregularities in the substrate and flow into a seamless, hygienic and highly durable surface.
- Explore: Quartz & SiC broadcast resin floors
1.5 to 9 mm
Quartz & SiC broadcast resin floors
Formed from a base resin coat broadcast to saturation with quartz sand or hard silicon carbide (SiC) and sealed with a finishing topcoat, this 1.5 to 9 mm system delivers outstanding slip resistance.
- Explore: Heavy-duty resin mortar screeds
4 mm minimum
Heavy-duty resin mortar screeds
Formulated with a reduced binder ratio and a coordinated fine mineral aggregate blend, a resin mortar floor is spread by squeegee and smoothed by steel trowel at a minimum thickness of 4 mm.
Technical comparison
How to choose between our 4 resin floor families
At-a-glance comparison of thicknesses, installation methods and typical applications.
| Coatings | Self-levelling liquid | Quartz / SiC broadcast | Resin mortar screeds | |
|---|---|---|---|---|
| Typical thickness | Up to 0.5 mm (0.1 to 0.5 mm) | Up to 3 mm (1.5 to 3 mm) | 1.5 to 9 mm | 4 mm minimum |
| Application method | Roller application | Poured & de-aired (self-levelling) | Full-saturation broadcast + sealer | Squeegee spread + steel-trowel finish |
| Effect on substrate | Follows concrete profile | Levels minor roughness | Creates anti-slip mineral profile | Levels coarse defects & forms slopes |
| Mechanical load rating | Light to medium | Medium to high (dynamic loads) | High (mechanical & thermal) | Extreme (heavy impact & point loads) |
| Typical environments | Storage, workshops, cost-effective renewal | Assembly halls, ESD paint lines, interiors | Food industry, metallurgy, wet zones | Heavy industry, loading bays, worn slabs |
Application areas
Resin flooring engineered around your operational constraints
Industrial and decorative resin floor systems are designed for new builds and refurbishments facing the following requirements:
Controlled turnaround times
Fast-curing formulations and efficient site scheduling to minimise downtime in your production or commercial space.
Mechanical & thermal resistance
Built to endure intensive forklift traffic, heavy impacts, abrasion and thermal cycling.
Temperature stability
Resin systems tailored to temperature variations in industrial halls, ovens, commercial kitchens and cold stores.
Chemical resistance
Long-lasting protection against acids, alkalis, oils, hydrocarbons, solvents and industrial cleaning agents.
Stain-resistant & dust-proof
Dense, non-porous surface that prevents liquid absorption, stubborn stains and concrete dusting.
Waterproofing & impermeability
Seamless monolithic membrane ideal for permanently wet production zones, wash bays and walk-in showers.
Tailored technical properties
Slip-resistant (R10–R13), antistatic (ESD), thermally conductive or flexible floor builds per your specification.
Design & customisation
Broad RAL colour palette, decorative coloured quartz blends and gloss, satin or matt finishes.
“Every situation has its appropriate floor system.”
Your free quote
Get in touch today to assess your substrate and receive a free quote for your industrial or decorative resin floor.