Film-forming system · 0.1 to 0.5 mm

Resin floor coatings and finishing sealers

Resin floor coatings are high-performance film-forming systems (up to 0.5 mm thick) that provide reliable, cost-effective protection for concrete slabs exposed to light-to-medium loads in storage and manufacturing zones.

Request a coating quoteView our projects

COATINGS & SEALERSUp to 0.5 mm
Résifred applicator rolling a grey epoxy floor coating in an industrial hallRoller application of an epoxy finishing coating
Overview of a 1,000 m² industrial hall protected by a high-gloss epoxy floor coatingStorage & production zones
Uniform, light-reflective finish on an industrial resin floorDust-proof & mild-acid protection

Technical properties

Why choose a resin floor coating?

Also known as a film-forming system, a coating based on epoxy, polyurethane, water-borne resin or vinyl ester seals and protects your concrete slabs effectively.

  • Reliable chemical protection

    Forms an impervious barrier protecting concrete against oils, greases, hydrocarbons and mild acids.

  • Follows the substrate profile

    Thin 0.1 to 0.5 mm film that preserves the existing surface profile and micro-texture of the concrete slab.

  • Permanent dust-proofing

    Eliminates concrete dusting permanently and simplifies daily cleaning with scrubber-dryers.

  • Cost-effective solution

    Optimal cost-to-area ratio for protecting large industrial and logistics floor surfaces quickly.

  • Custom colours & sheen

    Wide range of RAL colours, gloss, satin or matt finishes, and clear safety walkway demarcation.

  • Fast return to service

    High-output roller application that keeps operational downtime in your facility to a minimum.

Application areas

Where we apply our finishing coatings

Coatings perform equally well as a standalone protective system on sound concrete slabs or as a finishing topcoat over a thicker epoxy system.

Warehouses, logistics and manufacturing halls

For floors exposed to foot traffic or light-to-medium wheeled equipment.

  • Storage halls, logistics warehouses and order-picking zones
  • Light manufacturing, assembly workshops and maintenance bays
  • Plant rooms, utility areas, garages and indoor car parks

Finishing topcoat and resin floor refurbishment

To seal, refresh or upgrade an existing resin floor surface.

  • Protective topcoat over a 3 mm epoxy floor (as completed on our 1,000 m² industrial projects)
  • Aesthetic and technical renewal of worn resin floors
  • Epoxy, polyurethane, water-based or vinyl ester formulations tailored to your requirements

In the field

Examples of floor coatings applied by Résifred

Industrial floors in Wallonia finished with a durable roller-applied epoxy coating.

  • Résifred applicator rolling a grey epoxy finishing coating
    Assembly hall · 1,000 m²

    Uniform roller application of an epoxy finishing coating

  • Industrial resin floor with a bright grey finishing topcoat
    Work zone · 1,000 m²

    Smooth, light-reflective finish following topcoat application

  • Roller application of an epoxy finish inside a large industrial hall
    Industrial hall · 1,000 m²

    Large-area industrial execution following mechanical substrate preparation

View all our projects

Installation process

The 4 steps of coating application

  1. Step 1 : Assessment & preparation

    Diamond grinding or shot-blasting of the concrete slab followed by industrial dust-free vacuuming.

  2. Step 2 : Bonding primer

    Application of a penetrating resin primer that seals substrate porosity and ensures adhesion.

  3. Step 3 : Coating application

    Uniform roller application of one or two pigmented resin coats (epoxy or polyurethane).

  4. Step 4 : Inspection & handover

    Film uniformity check and controlled curing schedule prior to reopening the area to traffic.

Frequently asked questions about floor coatings

What is the difference between a coating and a self-levelling floor?

A coating is a thin film-forming layer (up to 0.5 mm) applied by roller that follows the concrete profile, whereas a self-levelling liquid floor (up to 3 mm) is poured to level out minor surface irregularities and deliver higher mechanical resistance.

Will a coating hide cracks or holes in the concrete?

Because of its thin profile (≤ 0.5 mm), a coating reflects the underlying surface texture. Cracks and spalls are repaired during preparation; if the slab has major irregularities, we recommend a self-levelling system or a 4 mm+ resin mortar screed.

Which resin chemistries do you use for coatings?

Depending on your chemical, thermal and mechanical constraints, Résifred applies epoxy, polyurethane, water-borne (solvent-free) and vinyl ester coatings in close partnership with Remmers.

Your free quote

Get in touch today to assess your substrate and receive a free quote for your industrial or decorative resin floor.

Request a quote